Sensor LED Tubes

Our movement sensor tubes detect movement with a state-of-the-art infrared sensor. The movement sensor conserves energy by turning off the tube or dimming it when there is no activity. When movement triggers the sensor in the tube it increases to full brightness and consumes 18 watts of electricity. At 18 watts the tube produces about the same illumination as a 36 watt fluorescent tube. If no movement is sensed for a time the tube turns off again or dims.

Product benefits

  • Quick, simple and safe replacement without rewiring
  • Instant-on light, therefore ideally suitable in combination with sensor technology
  • Very high resistance to switching loads
  • Also suitable for operation at low temperatures
  • Extremely break resistant thanks to aluminum heat sink and polycarbonate cover
  • Especially uniform light emission

Areas of application

  • General illumination within ambient temperatures from (-20° F to 45°F)
  • Corridors, stairways, parking garages
  • Cooling and storage rooms
  • Domestic applications
  • Industry
  • Warehouses
  • Supermarkets and department stores

Product features

  • LED alternative to classic T8 fluorescent lamps in CCG and ECG driven luminaires
  • High Luminous intensity for sophisticated lighting tasks
  • Lifetime: up to 35,000 h
  • Mercury-free and RoHS compliant
  • Type of protection: IP20

LED Tubes Data

Rated wattage 10 W / 18W / 23 W
Input voltage Ac85-135V / Ac185-265V
Operating frequency 50…60 Hz
Power factor λ 0.8
luminous flux 900 lm / 1700 lm / 2300 lm /
Color temperature 3000K / 4000k / 6000k
Light color (designation) Warm White / Cool White / Daylight
Color rendering index Ra ≥80
Beam angle wide distribution, 300 °
Standard deviation of color matching ≤4 sdcm
Warm-up time (60 %) < 1.00 s
Starting time < 2.0 s
Dimension 10 watt 2FT (L : 600mm Χ ∅ : 26 mm)
18 watt 4FT (L : 1200mm Χ ∅ : 26 mm)
23 watt 5FT (L : 1500mm Χ ∅ : 26 mm)
life time 35000 h
Ambient temperature range -20° F to 45°F
Number of switching cycles 200000
Lumen maintenance at end of service life 0.70
Base(standard designation) G13
Mercury content 0.0 mg
Mercury-free Yes
Appropriate disposal acc. to WEEE Yes
Product remark When used to replace a T8 fluorescent lamp the total energy efficiency and light distribution depends on the design of the lighting system
Dimmable No
Type of protection IP20
Energy efficiency class A+
Energy consumption 6/13/17 kWh/1000h