LED PL Retrofit Lamps

The LED PL Retrofit Lamps are designed to replace traditional compact fluorescent ones. They are offered in two wattages 7W and 10W. Featuring a wide beam angle, these lamps are commonly used for indoor illumination purposes like wall sconces, recessed cans, step lights, task lights, emergency luminaries and other similar applications. LED PL retrofits feature a simple ballast bypass to ensure maintenance-free, energy-saving operation and higher performance, as well as instant-on capabilities.

When you're tired of flickering porch lights, retrofit the CFL plugins from your porch sconces or office fixtures with plugin LED retrofit lamps. Plugin LED lamps are extremely long lasting, and have an exceptional energy efficiency rating. They handle temperature changes far better than traditional fluorescents as well. These 2-pin 4-pin LED PL lamps range in wattages from 7 w / 10 watts and replace a standard GX23 or GX24 universal socket.

Product benefits

  • Very low energy consumption
  • Robust against vibrations
  • Extremely long life
  • No UV and near-IR radiation in the light beam
  • Instant 100 % light, no warm-up time
  • Can be easily fitted instead of ordinary light bulbs
  • Lower thermal output (compared with the standard reference product)
  • Correct operation even at low temperatures

Areas of application

  • Domestic applications
  • General illumination
  • Chandeliers
  • Outdoor applications only in suitable luminaires

Product features

  • LED alternative to conventional lamps
  • Good quality of light; color rendering index Ra: ≥ 80; constant chromaticity
  • High color consistency: ≤ 6 SDCM
  • Mercury-free lamps
  • Not-dimmable

LED PL Retrofit Technical Data

Rated wattage 7 W , 10 W
Input voltage Ac85-135V / Ac185-265V
Operating frequency 50…60 Hz
Power factor λ 0.8
Claimed equiv. conventional lamp power 60 W, 75 W
luminous flux 700 lm, 1100 lm
Color temperature 2800 K / 4000 K / 6000 K
Light color (designation) Warm White / Cool White / Daylight
Color rendering index Ra ≥80
Beam angle wide distribution, 160 °
Standard deviation of color matching ≤6 sdcm
Warm-up time (60 %) < 1.00 s
Starting time < 0.5 s
Dimension L : 165 mm Χ ∅ : 35 mm
life time 35000 h
Number of switching cycles 100000
Lumen maintenance at end of service life 0.70
Type of installation GX24, GX23, E27
Protection class insulation class II (safety insulation)
Type of protection IP54
Mercury content 0.0 mg
Mercury-free Yes
Design / version Frosted
Appropriate disposal acc. to WEEE Yes
Product remark All technical parameters apply to the entire lamp/Due to the complex production process for light-emitting diodes, the typical values shown for the technical LED parameters are purely statistical values that do not necessarily match the actual technical parameters of each individual product, which can vary from the typical value
Dimmable Not-Dimmable
Energy efficiency class A+
Energy consumption 7,10 kWh/1000h